The Model 1224 Pipe Threader threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.
Features:
An induction motor helps minimize noise.
A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced.
1/4"-2" Universal Die Head; 2 1/2"-4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads.
Constant and proper lubrication of dies and workpiece with through-head oiling.
Includes:
(1) No. 714 (914) 2 1/2"- 4" receding self-opening die head.
(1) No. 711 (911) 1/4"- 2" universal self-opening die head.
(1) set 1/2"- 3/4" universal alloy dies.
(1) set 1" - 2" universal alloy dies.
(1) set 2 1/2"- 4" 1224 high-speed dies.
(1) gallon Nu-Clear oil.
(3) hex keys.
(1) spare F-229 cutter wheel.
(1) 3/4" combination wrench.
(1) No. 744 reamer.
(1) No. 764 cutter.
Specifications:
|
Nominal Pipe Capacity |
1/4"-2" (6mm-100mm) @ 36 RPM, 2-1/2"-4" (65mm-100mm) @ 12 RPM, 4"-6" (100mm-150mm) with 161 Geared Threader. |
|
Bolt Capacity |
1/4"-2" (6mm-50mm). |
|
Motor Control |
Reverse/off/forward, heavy-duty rotary-type and integral foot switch. |
|
Gear Box |
Two-speed gear box with a 3:1 ratio. |
|
Chuck |
Hammer-type with replaceable rocker-action jaw inserts. |
|
Rear Centering Device |
Cam action. |
|
Oiling Pump |
Self-priming, gerotor-type, automatic-reversing, constant-flow. |
|
Oiling |
Through die head |