The Model 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.
Features:
An induction motor helps minimize noise.
A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced.
1/4"-2" Universal Die Head; 2 1/2"-4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads.
Constant and proper lubrication of dies and workpiece with through-head oiling.
Specifications:
|
Nominal Pipe Capacity |
1/4"-2" (6 mm-100 mm) @ 36 RPM, 2-1/2"-4" (65 mm-100 mm) @ 12 RPM, 4"-6" (100 mm-150 mm) with 161 Geared Threader. |
|
Bolt Capacity |
1/4"-2" (6 mm-50 mm). |
|
Die Head |
711/714 |
|
RPM |
36/12 |
|
Voltage (V) |
120 |
|
Frequency (Hz) |
60 |
|
Motor Control |
Reverse/off/forward, heavy-duty rotary-type and integral foot switch. |
|
Gear Box |
Two-speed gearbox with a 3:1 ratio. |
|
Chuck |
Hammer-type with replaceable rocker-action jaw inserts. |
|
Rear Centering Device |
Cam action. |
|
Oiling Pump |
Self-priming, gerotor-type, automatic-reversing, constant-flow. |
|
Oiling |
Through die head |